Skip to main content
Schneider Electric ENW13279

Schneider Electric ENW13279 EasyPact NW Switch Disconnector,

MPN ENW13279
Active

Schneider Electric EasyPact NW, ENW13279, switch disconnector, 3-pole, 800 A AC-23A, drawout mount, 1000 V insulation, IP30.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW13279 key specifications
ParameterValue
Main product or component typeSwitch disconnector
Voltage440 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 800 A AC 50/60 Hz 440 V
Utilization categoryAC-23 A
IP ratingIP30
Terminal pitch70 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C
Storage temperature-40...85 °C without control unit

All specifications

ENW13279 additional specifications
ParameterValue
Pollution degreeclass 3
Depth277 mm
Width358 mm
Height322 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The 3-pole drawout design means it slides into a rail base plate, so you can rack it out for maintenance without pulling cables. Rated insulation voltage sits at 1000 V AC, and the unit carries a 12 kV impulse withstand, so it handles transient spikes common on industrial distribution.

The 800 A AC-23A rating governs real motor-switching duty — that's the number that decides if this disconnector can handle your load, not a generic thermal current. Short-time withstand is 50 kA for 1 second at 220-440 V, and the making capacity hits 75 kA, so it can close onto a fault without welding contacts. The IP30 enclosure keeps fingers out but isn't sealed against water spray, so mount it inside a cabinet.

Drawout mounting on a rail base plate — the connection pitch is 70 mm without a spreader, and rear connections can be oriented vertically or horizontally. That gives you flexibility in busbar layout. Mechanical durability is 20,000 cycles with maintenance or 10,000 without; electrical durability in AC-23A is 5,000 cycles at 440 V.

MPN
ENW13279