Skip to main content
Schneider Electric ENW24171

Schneider ENW24171 EasyPact NW Switch Disconnector, 3200A, 3

MPN ENW24171
Active

Schneider Electric EasyPact NW series, ENW24171 switch disconnector, 3200 A AC-23A, 3 poles, drawout mounting, 50/60 Hz.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24171 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 3200 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24171 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width441 mm
Height439 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

What this part is and what the ratings mean

The Schneider Electric ENW24171 is a 3-pole switch disconnector in the EasyPact NW range, rated for 3200 A in AC-23A utilisation category at 690 V AC. AC-23A covers switching of motor loads and other highly inductive circuits — this is the rating that governs real-world fit, not a resistive-only figure. The part carries a rated short-time withstand current (Icw) of 50 kA for 1 second, meaning it can survive a bolted fault at that level without welding its contacts or rupturing the enclosure, which is the key coordination figure for the downstream protection scheme. Rated impulse withstand voltage (Uimp) is 12 kV per IEC 60947-3, and the rated insulation voltage (Ui) is 1000 V AC. Pollution degree 4 per IEC 60664-1 means the part is rated for heavy industrial environments where conductive dust or condensation is present — not a clean-room or light-commercial part. The enclosure carries IP40, so it keeps out tools and wires larger than 1 mm but is not sealed against water ingress; install it inside a cabinet or switchgear lineup.

MPN
ENW24171