Skip to main content
Schneider Electric ENW24172

ENW24172 EasyPact NW Switch Disconnector, 4000 A, 3P, Drawou

MPN ENW24172
Active

Schneider Electric EasyPact NW switch disconnector, ENW24172, 4000 A AC-23A, 3 poles, drawout mount, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24172 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 4000 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24172 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width441 mm
Height439 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

What the 4000 A AC-23A rating means for your isolation point

The ENW24172 is a 3-pole switch disconnector from the Schneider Electric EasyPact NW range, rated 4000 A in utilisation category AC-23A at 690 V AC. Drawout mounting means the chassis slides out of its cradle for inspection or replacement without disturbing the busbars — a key feature for main incomers or tie-breakers in distribution switchboards where downtime matters.

Short-circuit performance and isolation integrity

Rated short-time withstand current (Icw) is 55 kA for 1 second or 30 kA for 3 seconds — that's the fault current the switch can carry without welding its contacts until an upstream breaker clears. Short-circuit making capacity (Icm) is 121 kA at 50/60 Hz, meaning it can close onto a bolted fault of that magnitude. The switch is certified for isolation per IEC 60947-3, with a visible contact position indicator and an impulse withstand voltage of 12 kV.

Mechanical and electrical endurance — what 20 000 cycles means on a main switch

Electrical durability under AC-23A load is 5000 cycles at 440 V or 2500 cycles at 690 V without maintenance. For a main disconnector that may be operated only a few times a year, that's effectively a lifetime component. If your application cycles it daily (e.g. as a machine isolator), the 2500-cycle figure at 690 V becomes a real planning number.

Installation footprint and environmental limits

Dimensions are 441 mm wide × 439 mm high × 395 mm deep. Rear connection terminals with a pitch of 115 mm without spreader. Mounts on a rail in a drawout cradle.

MPN
ENW24172