Skip to main content
Schneider Electric ENW24173

Schneider Electric ENW24173 EasyPact NW Switch Disconnector,

MPN ENW24173
Active

Schneider Electric EasyPact NW series, ENW24173 switch disconnector, 800 A AC-23A, 690 V AC, 3 poles, fixed mounting, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24173 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 800 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24173 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width422 mm
Height352 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24173 is a fixed-mount switch disconnector from the EasyPact NW range, rated for 800 A in AC-23A duty at 690 V AC, 50/60 Hz.

The short-time withstand current (Icw) is 50 kA for 1 second or 25 kA for 3 seconds, which governs selectivity coordination: downstream devices must clear a fault before this switch disconnector's thermal limit is reached. The short-circuit making capacity (Icm) is 105 kA peak, confirming it can close onto a bolted fault without welding contacts. Pollution degree 4 per IEC 60664-1 is the most severe industrial classification — conductive dust or condensation is expected. Suitability for isolation is marked Yes per IEC 60947-3, so the open position provides a visible air gap that satisfies lockout/tagout requirements.

Deployment context

Fixed mounting on a base plate with rear connection terminals. The 422 mm width and 352 mm height fit a standard enclosure footprint; depth is 297 mm including the operator mechanism. Connection pitch is 115 mm without spreader — verify busbar or cable lug spacing against your existing assembly. The contact position indicator gives a visual open/closed confirmation at the front of the switch.

MPN
ENW24173