Skip to main content
Schneider Electric ENW24178

Schneider Electric ENW24178 EasyPact NW Switch Disconnector,

MPN ENW24178
Active

Schneider Electric EasyPact NW switch disconnector, ENW24178, 2500 A AC-23A, 3-pole, fixed mount, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24178 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 2500 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24178 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width422 mm
Height352 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

Switch disconnector for distribution, 2500 A AC-23A

The Schneider Electric ENW24178 is a fixed-mount switch disconnector in the EasyPact NW range, rated 2500 A in AC-23A utilisation category at 690 V AC 50/60 Hz. That AC-23A rating means it handles switching of motor loads and other highly inductive circuits — not just resistive break — with a making capacity of 105 kA peak and a short-time withstand of 50 kA for 1 s. Three poles, rear-connected, with a vertical or horizontal connection position.

The 2500 A continuous rating sets the maximum load current the switch can carry without exceeding temperature limits — sized for a main feeder or large distribution bus. The AC-23A duty classification confirms it is rated for switching motor loads, not just passive circuits; the 5000-cycle electrical durability at 440 V and 2500 cycles at 690 V give a realistic service life under those inductive loads. The 50 kA short-time withstand for 1 s and 105 kA making capacity define the fault-handling capability — critical for selectivity studies and SCCR compliance in a panel. Rated insulation voltage of 1000 V and impulse withstand of 12 kV cover 690 V line-to-line systems with margin for transient overvoltages.

Switch disconnectors of this class serve as the main incoming isolation point in low-voltage distribution boards, motor control centres, and industrial power panels. The suitability-for-isolation marking confirms it provides visible-break isolation per IEC 60947-3 — required for lockout/tagout procedures during maintenance.

MPN
ENW24178