Skip to main content
Schneider Electric ENW24185

Schneider Electric ENW24185 EasyPact NW Switch Disconnector,

MPN ENW24185
Active

Schneider Electric EasyPact NW, switch disconnector, ENW24185, 2000 A, 4 poles, drawout, 690 V AC, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24185 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 2000 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24185 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width556 mm
Height439 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24185 is a 4-pole switch disconnector from the EasyPact NW family, rated for 2000 A continuous duty in AC-23A utilisation at 690 V AC. It's a drawout unit — mounts on a rail, rear-connected, with the neutral on the left. That AC-23A rating means it's built to handle motor loads and other high-inrush switching, not just resistive circuits. The 50 kA short-time withstand for 1 second (105 kA making capacity) tells you it can ride through a fault without welding contacts, which is the kind of margin a distribution panel needs when the upstream breaker isn't sized tight.

The 1000 V rated insulation voltage (Ui) and 12 kV impulse withstand (Uimp) confirm this switch is suitable for isolation per IEC 60947-3 — you can lock it out and work downstream with confidence. The IP40 enclosure keeps fingers and tools out but isn't sealed against water, so it belongs inside a cabinet, not out on the floor.

MPN
ENW24185