Skip to main content
Schneider Electric ENW24194

Schneider Electric ENW24194 EasyPact NW Switch Disconnector,

MPN ENW24194
Active

Schneider Electric EasyPact NW, switch disconnector, ENW24194, 2500 A AC-23A, 690 V AC, 4 poles, fixed mounting, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24194 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 2500 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24194 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width537 mm
Height352 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24194 is an EasyPact NW switch disconnector rated for 2500 A in AC-23A duty at 690 V AC, 50/60 Hz, with four poles.

The AC-23A utilisation category covers switching of motor loads and other highly inductive loads — the 2500 A rating is the operational current at 690 V for that duty, not a resistive-heater rating. For short-circuit conditions, the switch can make onto 105 kA peak (Icm) and withstand 50 kA for 1 second (Icw), which gives the panel designer headroom for high-fault installations. Pollution degree 4 per IEC 60664-1 means the switch is rated for harsh environments where conductive pollution (dust, moisture) may occur — typical in heavy industrial switchrooms or outdoor enclosures. The IP40 enclosure rating keeps tools and fingers out but is not washdown-rated; install it inside a panel if the ambient is wet.

MPN
ENW24194