Skip to main content
Schneider Electric ENW24203

ENW24203 EasyPact NW Switch Disconnector, 3200A, 3P

MPN ENW24203
Active

Schneider Electric EasyPact NW, switch disconnector, ENW24203, 3 poles, 3200 A AC-23A, drawout, 395 mm depth.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24203 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 3200 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24203 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width441 mm
Height439 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The ENW24203 is a 3-pole switch disconnector from the Schneider Electric EasyPact NW range, rated 3200 A in AC-23A duty at 690 V AC. That AC-23A utilisation category means it handles switching of motor loads and other highly inductive circuits — not just resistive break — so it's specified for distribution panels where the load side includes motors, transformers, or capacitor banks. The drawout mounting lets you rack the unit out for maintenance without disturbing the bus connections, which is standard for high-current switchgear where downtime for isolation needs to be measured in minutes, not hours. Rated short-time withstand current (Icw) is 66 kA for 1 second, or 36 kA for 3 seconds — this tells you the disconnector can survive a fault current long enough for an upstream breaker to clear it, which is the selectivity requirement for a distribution feeder. The making capacity (Icm) is 143 kA peak, so it can close onto a fault without welding contacts. That combination of ratings puts this squarely in heavy industrial switchgear, not light commercial.

Drawout mounting on a rail with rear connection. The connection pitch is 115 mm without a spreader, which is the centre-to-centre spacing for the rear bus stabs — verify your panel busbar centres match before specifying. Dimensions: 441 mm wide, 439 mm high, 395 mm deep. The depth is the projection behind the panel face for the drawout cradle. Electrical durability at 440 V AC-23A is 5,000 cycles without maintenance; at 690 V it drops to 2,500 cycles. If your application cycles this disconnector daily, factor that into your maintenance schedule.

MPN
ENW24203