Skip to main content
Schneider Electric ENW24204

ENW24204 EasyPact NW Switch Disconnector, 4000A, 3P, Drawout

MPN ENW24204
Active

Schneider Electric EasyPact NW series, ENW24204 switch disconnector, 3-pole drawout, 4000 A AC-23A, 690 V AC, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24204 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 4000 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24204 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width441 mm
Height439 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24204 is a 3-pole drawout switch disconnector from the EasyPact NW range, rated for 4000 A in AC-23A utilisation category at 690 V AC. The 66 kA short-time withstand for 1 second (36 kA for 3 seconds) tells you it holds through downstream faults until an upstream breaker clears them.

Drawout mounting on a rail, with rear connection. The 115 mm connection pitch without spreader sets the busbar spacing — standard for this class of high-current switch. IP40 enclosure protection means it is suited for indoor panel installation where tools are needed to access live parts. Pollution degree 4 per IEC 60664-1 confirms it handles conductive dust and condensation environments typical in heavy industrial switchgear rooms.

The headline 4000 A is the AC-23A operational current at 690 V — that is the motor-switching duty rating, not a resistive-heater rating. Suitability for isolation per IEC 60947-3 means it provides visible-break isolation when open — a requirement for lockout/tagout on distribution feeders.

MPN
ENW24204