Skip to main content
Schneider Electric ENW24206

ENW24206 EasyPact NW switch disconnector, 1000A, 3P, fixed

MPN ENW24206
Active

Schneider Electric EasyPact NW switch disconnector, ENW24206, 1000 A AC-23A, 690 V, 3 poles, fixed mounting, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24206 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1000 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24206 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width422 mm
Height352 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The ENW24206 is a fixed-mount switch disconnector from the EasyPact NW range, rated for 1000 A in AC-23A duty at 690 V AC — that's the heavy switching category for motor loads and mixed inductive/resistive circuits, not just resistive break. The 1000 A AC-23A rating tells you it handles the inrush of a large motor bank or transformer without derating; the 143 kA making capacity confirms it can close onto a fault without welding contacts.

Short-time withstand (Icw) is 66 kA for 1 second or 36 kA for 3 seconds — this governs coordination with upstream protection. If your system fault level exceeds 66 kA at the disconnector terminals, you need a current-limiting fuse or breaker ahead of it.

Fixed mounting on a base plate — no DIN rail, so plan for a drilled backplate in the panel. Dimensions are 422 mm wide × 352 mm high × 297 mm deep; the rear connection with a 115 mm connection pitch without spreader means the busbar or cable lugs land on the back face, so leave clearance behind the panel for access. Horizontal or vertical orientation is acceptable.

MPN
ENW24206