Skip to main content
Schneider Electric ENW24208

Schneider Electric ENW24208 EasyPact NW Switch Disconnector,

MPN ENW24208
Active

Schneider Electric EasyPact NW switch disconnector, ENW24208, 1600 A AC-23A, 3 poles, fixed mount, 690 V AC, IEC 60947-3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24208 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1600 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24208 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width422 mm
Height352 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24208 is a fixed-mount switch disconnector in the EasyPact NW range, rated 1600 A in AC-23A utilisation category at 690 V AC. AC-23A covers switching of motor loads and other highly inductive circuits — the 1600 A figure is the operational current for that duty, not a resistive-heater rating. For distribution applications where isolation is required, the part carries a suitability-for-isolation mark per IEC 60947-3, meaning the open gap meets the standard's safety separation requirements for a visible-break isolator. The short-time withstand rating (Icw) is 66 kA for 1 second or 36 kA for 3 seconds — this governs how long the disconnector can carry fault current before the upstream protection clears. The making capacity (Icm) of 143 kA AC means it can be closed onto a bolted fault without welding contacts. Both figures are critical for coordination studies: the upstream breaker or fuse must clear within those time-current boundaries to keep the disconnector in the circuit. The IP40 enclosure keeps tools and fingers out but is not washdown-rated; install in a cabinet or enclosure for wet-area duty.

Fixed mounting on a base plate — no DIN-rail clip. Connection pitch is 115 mm without a spreader. Rear connections accept vertical or horizontal orientation. Dimensions: 422 mm wide × 352 mm high × 297 mm deep.

Durability and maintenance

Mechanical durability is 20,000 cycles with maintenance or 10,000 without maintenance per IEC 60947-3. Electrical durability under AC-23A at 440 V is 6,000 cycles without maintenance; at 690 V it drops to 4,000 cycles. The contact position indicator gives a visual open/closed confirmation — useful during lockout/tagout procedures.

MPN
ENW24208