Skip to main content
Schneider Electric ENW24210

Schneider EasyPact NW ENW24210 Switch Disconnector, 2500A, 3

MPN ENW24210
Active

Schneider Electric EasyPact NW ENW24210, switch disconnector, 2500 A, H breaking capacity, 3 poles, fixed mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24210 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 2500 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24210 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width422 mm
Height352 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24210 is an EasyPact NW switch disconnector rated for 2500 A in AC-23A duty at 690 V AC. The H breaking capacity code and a short-circuit making capacity of 143 kA peak tell you it can close onto a fault and hold, which is the difference between a switch and a load-break device you'd trust in a distribution panel.

Fixed-mount on a base plate, rear-connected, with a 115 mm connection pitch without spreader. The footprint is 422 mm wide by 352 mm tall by 297 mm deep — that depth matters when you're laying out a panel with a back-to-back bus or a rear-access gland plate; it's not a shallow DIN-rail device.

The headline number is 2500 A in AC-23A, but the real selector for a distribution application is the short-time withstand: 66 kA for 1 s and 36 kA for 3 s. That's the fault current the switch can ride through without welding or failing open — it tells you the upstream breaker coordination point.

MPN
ENW24210