Skip to main content
Schneider Electric ENW24213

ENW24213 EasyPact NW Switch Disconnector, 800A, 4P, Drawout

MPN ENW24213
Active

Schneider Electric EasyPact NW switch disconnector, ENW24213, 800 A AC-23A, 4 poles, drawout, 690 V AC, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24213 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 800 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24213 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width556 mm
Height439 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The ENW24213 is a 4-pole switch disconnector from the Schneider Electric EasyPact NW range, rated 800 A in AC-23A duty at 690 V AC — that is the heavy motor and mixed-load switching category under IEC 60947-3, so it handles the high inrush of starting motors and the break of stalled rotors, not just resistive loads. It is certified for isolation (suitability for isolation conforming to IEC 60947-3), meaning you can rely on the visible contact gap as a safe disconnection point for downstream work — a key requirement in distribution panels where lockout/tagout procedures apply. Rated insulation voltage is 1000 V AC, and impulse withstand is 12 kV, so it lives comfortably in 690 V systems with margin for switching transients.

Drawout mounting on a rail — the switch body pulls out for inspection or replacement without disturbing the main bus connections. Rear-connected, vertical or horizontal orientation. Neutral on the left. Connection pitch is 115 mm without spreader. Pollution degree 4 per IEC 60664-1 — this is the harshest indoor classification (conductive dust or wet conditions inside the enclosure), so the creepage distances are sized for dirty environments.

Breaking and withstand capability

Breaking capacity code HA. Short-time withstand current is 66 kA for 1 second or 36 kA for 3 seconds — that tells you the switch can ride through a fault until an upstream breaker clears it, without welding or failing. Short-circuit making capacity is 143 kA peak at 50/60 Hz, so it can close onto a bolted fault and survive.

MPN
ENW24213