Skip to main content
Schneider Electric ENW24216

Schneider Electric ENW24216 EasyPact NW Switch Disconnector,

MPN ENW24216
Active

Schneider Electric EasyPact NW, switch disconnector, ENW16H, 1600 A AC-23A, 4 poles, drawout, 1000 V insulation, 66 kA Icw.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24216 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1600 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24216 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width556 mm
Height439 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

Switch disconnector for distribution, 1600 A AC-23A

The Schneider Electric ENW24216 is a 4-pole switch disconnector from the EasyPact NW series, rated for 1600 A in AC-23A utilization category at 690 V AC. The drawout mounting (withdrawal) lets you rack the unit out for inspection or replacement without disturbing the main bus connections, which matters in switchgear where downtime for panel access is the constraint. Rated insulation voltage is 1000 V AC, with an impulse withstand of 12 kV per IEC 60947-3. The short-time withstand current is 66 kA for 1 s, and the making capacity hits 143 kA peak — numbers that tell you this disconnector lives in a high-fault-capacity distribution board, not a light-duty panel.

Drawout chassis mounts on a rail (mounting support: rail), with rear connection points at a 115 mm pitch without spreader. The neutral position is left, and connection orientation accepts both vertical and horizontal bus arrangements. Panel cutout planning: width 556 mm, height 439 mm, depth 395 mm — that depth is the through-panel envelope, so verify the cabinet depth clears the rear connection hardware before committing the gland plate. Mechanical durability is 20,000 cycles with maintenance, 10,000 without; electrical endurance at 440 V AC is 6,000 cycles under AC-23A duty.

MPN
ENW24216