Skip to main content
Schneider Electric ENW24219

ENW24219 EasyPact NW Switch Disconnector, 3200 A, 4P, Drawou

MPN ENW24219
Active

Schneider Electric EasyPact NW switch disconnector, ENW24219, 3200 A AC-23A, 4 poles, drawout, 395 mm depth, 556 mm width, 439 mm height.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24219 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 3200 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24219 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width556 mm
Height439 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The ENW24219 is a 4-pole switch disconnector from the EasyPact NW range, rated for 3200 A in AC-23A duty at 690 V AC — that's the utilization category for heavy motor loads, including frequent starting and plugging. It's built to IEC 60947-3 and carries a 1000 V insulation rating, so it's suitable for isolation (the standard says yes). The drawout mounting means the moving contact assembly can be withdrawn from the fixed base for safe inspection or replacement without breaking the main bus connections.

The short-time withstand current (Icw) is 66 kA for 1 second, and the short-circuit making capacity (Icm) is 143 kA peak at 50/60 Hz. That combination means it can hold closed through a high fault current for a full second and then safely close onto a short circuit. The impulse withstand voltage (Uimp) is 12 kV, which covers typical distribution-level transient overvoltages.

This is a drawout switch disconnector designed for distribution panels. It mounts on a rail (the evidence says 'Mounting support: Rail') and connects at the rear — horizontal or vertical busbar orientation. The neutral pole is on the left, and the connection pitch is 115 mm without a spreader.

MPN
ENW24219