Skip to main content
Schneider Electric ENW24223

ENW24223 EasyPact NW Switch Disconnector, 1250A, HA, 4P

MPN ENW24223
Active

Schneider Electric EasyPact NW switch disconnector, ENW24223, 1250 A AC-23A, 4 poles, fixed mount, HA breaking capacity.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24223 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1250 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24223 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width537 mm
Height352 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24223 is a fixed-mount switch disconnector from the EasyPact NW range, rated 1250 A in AC-23A duty at 690 V AC. The 4-pole configuration with neutral on the left suits distribution panels where a single disconnect isolates all conductors. The HA breaking capacity code means it handles high prospective fault levels — backed by a 66 kA short-time withstand (Icw) for 1 second and a 143 kA making capacity (Icm). It is certified as an isolator per IEC 60947-3, so it provides visible-break isolation for downstream maintenance.

The AC-23A utilisation category covers switching of motor loads and other highly inductive circuits — this is not a general-purpose resistive load switch. At 690 V AC the rated operational current is 1250 A; the electrical endurance is 6000 cycles at 440 V and 4000 cycles at 690 V without maintenance. Mechanical durability is 20000 cycles with maintenance, 10000 without. The rated insulation voltage (Ui) is 1000 V AC, impulse withstand (Uimp) is 12 kV, and pollution degree 4 per IEC 60664-1 means it tolerates conductive dust environments — often found in cement, mining, or heavy industrial panels.

Fixed base-plate mount, rear connection with a 115 mm connection pitch (without spreader). The 537 mm width and 352 mm height fit standard distribution cubicle compartments; depth is 297 mm. IP40 front protection means it is suited for indoor panel installation where tools are required to access live parts.

MPN
ENW24223