Skip to main content
Schneider Electric ENW24225

Schneider Electric ENW24225 EasyPact NW Switch Disconnector,

MPN ENW24225
Active

Schneider Electric EasyPact NW, switch disconnector, ENW24225, 2000 A, AC-23A, 4 poles, fixed mount, 690 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24225 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 2000 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24225 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width537 mm
Height352 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The 4-pole (4P) configuration with neutral on the left handles three-phase plus neutral distribution in a single enclosure. Rated operational voltage is 690 V AC, with an insulation voltage of 1000 V AC and an impulse withstand of 12 kV — this gives headroom for 480/600 V industrial panels and confirms it meets the clearance/creepage requirements of IEC 60947-3 for isolation duty. Short-time withstand current (Icw) is 66 kA for 1 s, and the making capacity (Icm) is 143 kA peak — numbers that matter for selective coordination studies.

Deployment context: fixed-mount distribution in a panel

This is a rear-connected, base-plate-mounted switch disconnector with a vertical or horizontal connection orientation. The IP40 enclosure protection means it belongs inside a cabinet — not in a washdown zone. Dimensions are 537 mm wide × 352 mm high × 297 mm deep; plan for a 115 mm connection pitch without a spreader. The continuous duty rating means it can carry 2000 A without derating for load profile — sized for a main feeder or bus tie in a 480 V or 600 V distribution section. Mechanical durability is 20,000 cycles with maintenance, 10,000 without; electrical durability is 6,000 cycles at 440 V and 4,000 at 690 V in AC-23A — that is a robust switch, not a daily-operating contactor.

MPN
ENW24225