Skip to main content
Schneider Electric ENW24270

Schneider Electric ENW24270 EasyPact NW Switch Disconnector,

MPN ENW24270
Active

Schneider Electric EasyPact NW switch disconnector, ENW24270, 1000 A AC-23A, 690 V AC, 4 poles, fixed mount, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24270 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1000 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24270 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width537 mm
Height352 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The ENW24270 is a 4-pole switch disconnector from Schneider Electric's EasyPact NW range, rated for 1000 A in AC-23A duty at 690 V AC — meaning it handles the high inrush of motor loads or mixed resistive-inductive circuits without derating. It's built for distribution panels where the disconnect needs to serve as a visible-break isolation point under load.

Ratings that matter

Short-circuit performance is substantial: 50 kA rated short-time withstand (Icw) for 1 second, and 105 kA peak making capacity (Icm). That means it can close onto a fault and hold through a downstream short without welding contacts or bursting the enclosure. Pollution degree 4 per IEC 60664-1 means the clearance and creepage paths are designed for conductive dust or condensation — common in switchgear rooms near cement plants, foundries, or outdoor substations.

Fixed mount on a base plate, rear-connected. The neutral sits on the right side (viewed from the front). Connection pitch is 115 mm without a spreader, so busbar or cable lugs need to fit that spacing. Overall footprint: 537 mm wide, 352 mm high, 297 mm deep.

MPN
ENW24270