Skip to main content
Schneider Electric FCE200523B200

Schneider Electric FCE200523B200 SHS Motor, 4000 rpm, 3 Nm

MPN FCE200523B200
Active

Schneider Electric SHS servo motor, FCE200523B200, 4000 rpm, 3 Nm nominal torque, 1260 W, 3-phase, IP69K/IP67, with holding brake and absolute multiturn Hiperface encoder, smooth shaft 19 mm diameter, 270.7 mm cable with stripped ends.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

FCE200523B200 specifications
ParameterValue
Encoder typeAbsolute multiturn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
Frequency8 kHz
Length10.7 in (270.7 mm)
Shaft diameter0.7 in (19 mm)
Max axial force fa n160 N
Max radial force fr n660 N 4000 rpm
Centring collar diameter3.3 in (85 mm)

Product details

Motor specs that drive the selection

The FCE200523B200 is a Schneider SHS servo motor rated for 1260 W continuous output at 4000 rpm nominal speed, with a nominal torque of 3 Nm and a peak stall torque of 28.3 Nm — that peak figure is what gets a load through a sticky spot without tripping the drive. It ships with an absolute multiturn SinCos Hiperface encoder — single-cable feedback that carries position and temperature data back to the drive, no separate encoder cable needed. IP69K on the motor body means it survives high-pressure, high-temperature washdown — a food-processing or pharmaceutical line fit. IP67 on the motor means the cable entry and bearing seal are protected against temporary immersion.

Mounting and shaft interface

Flange size is 100 mm (3.9 in), centring collar depth 3.5 mm. The smooth shaft is 19 mm diameter, 40 mm long with a 6 mm keyway — standard NEMA or IEC metric interface, no custom adapter needed. Electrical connection is a cable with stripped ends, 270.7 mm long. That's a fixed pigtail — plan the cable routing to the drive within that length, or budget a junction box. Maximum radial force at the shaft is 660 N at 4000 rpm, maximum axial force 160 N. If the load applies a belt tension or overhung load above those numbers, the bearing life drops fast.

Electrical and thermal limits

Stator resistance is 1.4 Ω, inductance 8.8 mH, back EMF constant 2.1 V/krpm at 20 °C. The torque constant is 1.18 Nm/A — so the drive's current loop directly sets the torque output, no conversion factor needed. Peak current is 28.3 A for 3 seconds — that's the I²t limit for the winding temperature. Continuous current at stall is 6.75 Nm, 3 Nm at rated speed. The hot-spot copper temperature is 130 °C; the natural-convection cooling relies on the motor surface being clear of debris. Switching frequency is 8 kHz — standard for a servo drive PWM stage. The motor is a 4-pole, 3-stack design, so it's a medium-inertia rotor tuned for dynamic response rather than ultra-low cogging.

MPN
FCE200523B200