Skip to main content
Schneider Electric GBX0400040403D

Schneider Electric GBX0400040403D Planetary Gearbox, 4:1

MPN GBX0400040403D
Active

Schneider Electric GBX series planetary gearbox, straight teeth, 40 mm diameter, 4:1 reduction ratio, 15 N.m continuous torque, 30 arcmin backlash, 96 % efficiency.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GBX0400040403D specifications
ParameterValue
Main product or component typePlanetary gearbox
IP ratingIP54
Temp operating max90 °C
Temp operating min-25 °C
Housing materialBlack anodized aluminium
Efficiency96%
Max axial force fa n200 N at 100 rpm, during 10000 hour at 30 °C 160 N at 100 rpm, during 30000 hour at 30 °C
Max radial force fr n200 N at 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C 160 N at 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C

Product details

4:1 reduction, 15 N.m continuous — the real load envelope

The GBX0400040403D is a 40 mm-diameter planetary gearbox with a 4:1 reduction ratio, straight-cut teeth, and a black anodized aluminium housing. It delivers 15 N.m continuous output torque and can handle 24 N.m peak — the continuous figure is the one to size against for a servo axis that runs cycles all shift. Efficiency is 96 %, so about 4 % of the input power dissipates as heat inside the housing. At 15 N.m output and 100 rpm that is roughly 6 W of thermal loss — well within the aluminium housing's natural convection capacity at 30 °C ambient.

Backlash and torsional windup — positioning error budget

Maximum torsional backlash is 30 arcmin — that is the lost motion at the output shaft when the input reverses direction. For a pick-and-place axis with a 10:1 effective ratio after the belt, 30 arcmin at the gearbox translates to roughly 0.5 mm of positioning uncertainty at the load; budget it into the controller's backlash compensation or accept it as a deadband. Torsional rigidity is 1 N.m/arcmin — the shaft winds up 1 arcmin for every N.m of applied torque. At the 15 N.m continuous rating the windup is 15 arcmin, which adds to the backlash figure for the total angular error under load.

30,000-hour service life — bearing and gear fatigue limits

Rated service life is 30,000 hours at 100 rpm output speed and 30 °C ambient. At that operating point the maximum radial force on the output shaft is 160 N (applied mid-shaft), and the maximum axial force is 160 N. Run it at higher speed or temperature and the life derates — the 10,000-hour figures allow 200 N radial and 200 N axial. The gearbox is lubricated for life — no oil changes or regreasing intervals. Shaft output seal is IP54, so it keeps out dust and light splash but is not rated for washdown.

Mounting and integration — any position, 40 mm bore

Mounts in any position — horizontal, vertical, or inverted — with no oil migration concern because the lubrication is a lifetime grease charge. The 40 mm outer diameter and C 45 steel output shaft suit direct coupling to a servo motor with a matching pilot diameter. Noise at no-load is 55 dB at 1 m — about the level of a quiet office printer, so it will not dominate the acoustic profile of a machine cell.

MPN
GBX0400040403D