Skip to main content
Schneider Electric GC1620E5

Schneider Electric GC1620E5 TeSys GC Modular Contactor, 2P,

MPN GC1620E5
Obsolete

Schneider Electric TeSys GC GC1620E5 modular contactor, 2-pole, 48 V AC 50 Hz control, 16 A rated, clip-on DIN rail, 1 x 18 mm module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GC1620E5 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 50 Hz
Main product or component typeModular contactor
Voltage<= 250 V AC
Coil voltage48 V AC 50 Hz
Insulation voltage ui500 V conforming to IEC 61095 500 V conforming to VDE 0110
Current16 A AC-7 A 5 A AC-7B
Breaking capacity40 A at 400 V for power circuit conforming to IEC 61095
Utilization categoryAC-7 A AC-7B
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max50 °C

All specifications

GC1620E5 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
ColorWhite
Depth62.5 mm
Width17.5 mm
Height81 mm
Electrical life cyclesAC-7 A: 100000 cycles AC-7B: 100000 cycles
Mechanical life cycles1000000 cycles
ApplicationMotor control Heating Lighting
Operating time10...25 ms opening 10...30 ms closing
Operating position30°/vertical
Operating temperature-5...50 °C

Product details

The 48 V AC control coil is the main spec to match against your BOM — this contactor will not pull in on 24 V or 110 V. The coil holds between 0.85 and 1.1 Uc at 50 Hz and drops out between 0.2 and 0.75 Uc, so a control transformer must deliver at least 40.8 V at the coil terminals under load. Inrush power is 15 VA at 20 °C; steady-state heat dissipation is 1.3 W at 50/60 Hz, which matters for thermal budgeting inside a sealed enclosure. The associated fuse recommendation is 16 A gL at up to 440 V for the power circuit; use that to coordinate upstream protection. Electrical durability is 100,000 cycles under AC-7A or AC-7B duty; mechanical durability is 1,000,000 cycles. Maximum operating rate is 300 cycles per hour at 50 °C. For high-duty-cycle applications like frequent conveyor indexing, check that the 300 cyc/h limit is not exceeded.

The contactor is 17.5 mm wide (one 18 mm module), 81 mm tall, and 62.5 mm deep. Screw-clamp terminals accept up to 6 mm² solid or flexible wire on the power side and 2.5 mm² on the control side. Tightening torque is 0.8 N.m for both. IP20 protection (fingers) out of the box; IP40 when installed in an enclosure per VDE 0106.

MPN
GC1620E5