Skip to main content
Schneider Electric ILM1401M02F0000

Schneider Electric ILM1401M02F0000 Servo Motor, 8.3 N.m

MPN ILM1401M02F0000
Active

Schneider Electric PacDrive 3 ILM series servo motor with integrated drive, 140 mm flange, 8.3 N.m nominal torque, 27 N.m peak, 1300 W, SinCos Hiperface multiturn feedback, holding brake.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1401M02F0000 specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Shaft end typeUntapped
Main product or component typeServo motor integrated drive
IP ratingIP54
Length11.5 in (292 mm)
Shaft diameter0.9 in (24 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n2210 N 1000 rpm 1760 N 2000 rpm
Centring collar diameter5.1 in (130 mm)

Product details

Sizing envelope for a PacDrive 3 axis

The ILM1401M02F0000 sits in the PacDrive 3 ILM family as a servo motor with integrated drive — flange size 140 mm, nominal torque 8.3 N.m (73.5 lbf.in) at 1500 rpm, peaking at 27 N.m (239.0 lbf.in) when the drive pushes the 14.6 A Irms ceiling through the windings. Continuous output is rated at 1300 W with a 3.15 A line-rated current and a 3.2 A continuous stall current — the gap between continuous and peak (3.2 A vs 14.6 A) is the dynamic headroom the drive uses for accel/decel pulses, which is what makes this frame size work on cyclic packaging or indexing axes. Holding torque with the brake engaged is 18 N.m (159.3 lbf.in), exceeding the nominal torque figure so the brake can hold the load at zero speed without slipping — a 24 mm untapped shaft with no second shaft end and a 50 mm shaft length drives the coupling choice.

Feedback, brake, and the safety-side wiring

Feedback is absolute multiturn SinCos Hiperface — the position resolution comes from the encoder protocol rather than from an external homing routine, so the axis is position-known at power-on without a homing move. The holding brake is included and rated at 18 N.m — wire it through the drive's brake control output (not a separate supply) so the drive interlocks brake release with enable and applies the brake on stop categories that require it.

Mechanical fit and shaft loading budget

Mounting is international standard flange with a 130 mm centring collar, 3.5 mm depth, and four 11 mm mounting holes — the 140 mm flange and the bolt circle match the standard IEC mounting footprint for this frame. Maximum radial force Fr is 2210 N at 1000 rpm, derating to 1760 N at 2000 rpm — that derating curve is what governs pulley or pinion placement, not the headline torque number. Maximum axial force Fa is limited to 0.2 × Fr, so a belt drive with side load must stay inside that envelope or the bearings take the penalty.

Sourcing posture for this build

For a quote against the BOM, the unit ships as a single piece per package with natural-convection cooling — no external fan to derate around in a sealed cabinet.

MPN
ILM1401M02F0000