Skip to main content
Schneider Electric LX1FF062

Schneider LX1FF062 TeSys F Contactor Coil, 62 V AC 50 Hz

MPN LX1FF062
Obsolete

Schneider Electric TeSys F contactor coil, LX1FF062, 62 V AC 50 Hz, 550 VA inrush, 12-16 W heat dissipation.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FF062 specifications
ParameterValue
Control circuit typeAC 50 Hz
Main product or component typeContactor coil
Coil voltage62 V AC 50 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time23...35 ms closing 5...15 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

The Schneider Electric LX1FF062 is a replacement coil for TeSys F contactors, wound for 62 V AC 50 Hz control circuits. It draws 550 VA inrush at cos φ 0.3 and settles to 45 VA holding, dissipating 12 to 16 W at 50 Hz. The coil has no built-in suppressor module — you supply the RC snubber or varistor externally if the control circuit needs one.

The 62 V AC 50 Hz control voltage is the coil's nominal; it operates between 0.85 and 1.1 Uc (roughly 52.7 to 68.2 V) and drops out between 0.35 and 0.55 Uc (21.7 to 34.1 V) at 55 °C. That dropout band matters if your control transformer sags under load — the coil may release earlier than a 24 VDC equivalent would. Closing time runs 23 to 35 ms, opening 5 to 15 ms, which is typical for this frame size and fine for general motor switching.

This coil bolts into any TeSys F contactor frame (the LC1F range) that accepts the LX1FF coil platform. The 62 V AC 50 Hz winding is a non-standard voltage in most regions — 48 V and 110 V are more common — so verify your control transformer taps before committing. The coil draws 1.98 Ω DC resistance at 20 °C and 0.27 H inductance when closed, which helps size the suppression component if you add one externally.

MPN
LX1FF062