Skip to main content
Schneider Electric LX1FH1552

TeSys LX1FH1552 Contactor Coil, 155 V AC 40-400 Hz

MPN LX1FH1552
Obsolete

Schneider Electric TeSys LX1F series, LX1FH1552 contactor coil, 155 V AC 40...400 Hz, 8 W heat dissipation.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FH1552 specifications
ParameterValue
Control circuit typeAC 40...400 Hz
Main product or component typeContactor coil
Coil voltage155 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Operating time100...170 ms opening 40...65 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX1FH1552 is a replacement contactor coil from the Schneider Electric TeSys range, designed for LX1F contactors. The control circuit is 155 V AC at 40...400 Hz, so this is the voltage you need to supply from the panel to pull in the contactor. Coil technology is listed as without built-in suppressor module — meaning you'll need to add an external RC snubber or varistor across the coil if the control circuit drives inductive loads or long cable runs. The 8 W heat dissipation at rated voltage is steady-state; factor that into enclosure thermal rise.

Operating time is 100...170 ms opening and 40...65 ms closing. That's the mechanical stroke time — it tells you the contactor won't drop out faster than 100 ms, which matters for ride-through on voltage sags. The dropout threshold is 0.35...0.55 Uc (about 54 to 85 V AC), so the coil holds in down to roughly half the nominal voltage; below that it releases. Maximum operating rate is 2400 cycles per hour at 55 °C. That's one cycle every 1.5 seconds — fine for normal motor starting or resistive load switching, but not for high-speed jogging or frequent inching duty. Ambient operating temperature is -5 to 55 °C. Inside a closed panel near other heat sources, the top end gets tight — derate the operating rate or add ventilation if the panel ambient exceeds 40 °C.

MPN
LX1FH1552