Skip to main content
Schneider Electric LX1FK750

Schneider Electric LX1FK750 TeSys Contactor Coil, 750 V AC

MPN LX1FK750
Active

Schneider Electric TeSys LX1FK750 contactor coil, 750 V AC 50/60 Hz, without built-in suppressor module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FK750 specifications
ParameterValue
Control circuit typeAC 50/60 Hz
Main product or component typeContactor coil
Coil voltage750 V AC 50/60 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time100...170 ms opening 40...75 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX1FK750: Coil operating time is 100...170 ms opening and 40...75 ms closing — the opening delay is notably longer, which matters when coordinating with fast-acting safety circuits or PLC-driven sequences that expect a predictable dropout window. Control voltage limits are 0.85...1.1 Uc for operation and 0.3...0.5 Uc for drop-out at 131 °F (55 °C). That means the coil holds in down to about 637 V AC and drops out reliably below 375 V AC — useful for brownout ride-through or for verifying the coil will release on a sagging line. For a coil that cycles continuously — say, a conveyor jog or a reciprocating compressor — that rate sets the upper bound before thermal buildup shortens life. Coil resistance is 357 ohms inrush and 8735 ohms holding at 68 °F (20 °C). The high holding resistance means low steady-state power dissipation once the contactor is sealed — the inrush current is brief, so the coil runs cool in continuous duty. This coil has no built-in suppressor module. If the contactor is driven by a PLC output or a solid-state relay, an external RC snubber or varistor across the coil terminals is needed to limit voltage spikes on dropout.

The LX1FK750 is a replacement or spare coil for TeSys F contactors in motor control centers and panel builds. The 750 V AC control voltage is common in North American 600 V class installations and some European 690 V networks, so it fits plants with higher control voltages.

MPN
LX1FK750