Skip to main content
Schneider Electric LX1LC175

Schneider LX1LC175 TeSys Coil, 175 V AC 50 Hz / 200-208 V AC

MPN LX1LC175
Active

Schneider Electric TeSys LX1 series replacement coil, LX1LC175, 175 V AC 50 Hz / 200-208 V AC 60 Hz control circuit voltage, 12-18 VA sealed power consumption.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1LC175 specifications
ParameterValue
Main product or component typeCoil
Coil voltage175 V AC 50 Hz 200...208 V AC 60 Hz

Product details

The LX1LC175 is a replacement coil from the Schneider TeSys range, designed to swap into LC1 contactors when the original coil fails or the control voltage needs changing. It's not a standalone contactor — it's the electromagnet that pulls the main contacts in. Control circuit voltage is 175 V AC at 50 Hz, or 200 to 208 V AC at 60 Hz. If your line runs 50 Hz, you're feeding it 175 V; at 60 Hz, it'll take 200-208 V. That dual-frequency rating means one coil covers both common industrial mains standards.

Power draw and what it means on the van

Sealed power consumption is 12 to 18 VA at 60 Hz. The inrush spike hits 170 to 230 VA at 0.55 power factor. That inrush matters if you're sizing a control transformer or a 24 V DC supply feeding the coil via a relay — the pick-up surge can drop a marginal supply below the dropout threshold. Coil resistance measures 97.127 Ohm, plus or minus 10%. That's a quick field check with a multimeter — if you read open or a dead short, the coil is cooked. Inductance in the closed-circuit state is 0.107 mH.

MPN
LX1LC175