Skip to main content
Schneider Electric LX4D7BNW

Schneider LX4D7BNW TeSys Deca Contactor Coil, 32 V DC, Obsol

MPN LX4D7BNW
Obsolete

Schneider TeSys Deca contactor coil, LX4D7BNW, 32 V DC wide-range, for 80 A contactor, 22 W hold-in.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4D7BNW specifications
ParameterValue
Main product or component typeContactor coil
Temp operating max60 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Time constant75 ms
Operating temperature23...140 °F (-5...60 °C)

Product details

The LX4D7BNW is a replacement contactor coil from the Schneider TeSys Deca line, designed for the 80 A contactor frame. It is a 32 V DC wide-range coil, meaning it accepts a broader control voltage band than a fixed-coil variant — useful when the control supply is unregulated or shared across multiple loads. Rated hold-in power consumption is 22 W at 68 °F (20 °C), with an inrush power of 22 W as well. The coil has no built-in suppressor module, so an external flyback diode or RC snubber is needed across the coil terminals if the control circuit requires back-EMF suppression.

Verify the coil voltage range and mechanical fit against the existing 80 A contactor before committing — the wide-range 32 V DC coil mates only with that specific frame.

The control circuit voltage limits specify drop-out at 0.1...0.3 Uc and operational at 0.75...1.2 Uc at temperatures below 131 °F (55 °C). This means the coil will reliably pick up when the control voltage is at least 75% of nominal (24 V DC for a 32 V DC nominal coil) and will drop out cleanly below about 3.2 V DC — important for fast contactor opening during a control power sag. These are the limits for high-speed cycling applications like stamping presses or rapid-transfer conveyors — most general motor-starting applications stay well below this rate. The time constant of 75 ms characterizes the coil's magnetic build-up — relevant when coordinating with the contactor's own closing time in a sequence. Ambient operating temperature range is -5...140 °F (-5...60 °C), covering typical panel environments without derating.

MPN
LX4D7BNW