Skip to main content
Schneider Electric LX4D7XD

TeSys LX4D7XD Contactor Coil, 600 V DC, Obsolete

MPN LX4D7XD
Obsolete

TeSys Deca, contactor coil, LX4D7XD, 600 V DC standard for 80 A contactor, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4D7XD specifications
ParameterValue
Control circuit typeDC standard
Main product or component typeContactor coil
Coil voltage600 V DC
Temp operating max60 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Time constant75 ms
Operating temperature23...140 °F (-5...60 °C)

Product details

The LX4D7XD is a TeSys Deca contactor coil, a 600 V DC standard coil designed to drive an 80 A contactor in the TeSys range. It uses DC standard control circuit technology without a built-in suppressor module, so you'll need to add external flyback suppression if the driving circuit doesn't already provide it. The coil draws 22 W inrush and hold-in power at 20 °C, with an average resistance of 17425 Ohm.

The control circuit voltage limits are drop-out at 0.1...0.3 Uc and operational at 0.85...1.1 Uc at temperatures below 55 °C. The time constant of 75 ms is the L/R ratio of the coil; this matters for sizing the suppression network if you're driving it from a PLC output or solid-state relay. Ambient air temperature range for operation is -5 to 60 °C, so it's fine inside a standard ventilated enclosure but not for direct outdoor exposure without additional climate control.

For BOM lines that require this exact coil, sourcing goes through surplus or broker channels. If you're in the middle of a panel build or a repair, the 600 V DC coil is specific enough that a parametric substitute isn't straightforward — the replacement path is to source the original LX4D7XD or re-engineer the control circuit for a different coil voltage.

MPN
LX4D7XD