Skip to main content
Schneider Electric LX4FF140

TeSys LX4FF140 Contactor Coil, 140 V DC, Active

MPN LX4FF140
Active

Schneider Electric TeSys LX4FF140, contactor coil, 140 V DC, DC low consumption, without built-in suppressor module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4FF140 specifications
ParameterValue
Control circuit typeDC low consumption
Main product or component typeContactor coil
Coil voltage140 V DC
Temp operating max55 °C
Temp operating min-5 °C
Operating time30...40 ms closing 30...50 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

What this coil is for

The LX4FF140 is a replacement contactor coil from the TeSys range, designed for DC control circuits at 140 V DC. It's a DC low-consumption coil without a built-in suppressor module, so you'll need to add a free-wheeling diode or varistor externally across the coil terminals to protect the control circuit from the inductive kickback when the contactor drops out.

The coil is rated for 140 V DC nominal control voltage. It operates reliably between 0.85 and 1.1 times Uc at 55 °C, meaning it will pick up cleanly from about 119 V DC up to 154 V DC. Drop-out occurs between 0.15 and 0.2 Uc, so the contactor releases when the control voltage falls to roughly 21–28 V DC. That's a wide hysteresis — useful for ride-through on a sagging DC bus, but it also means the coil won't drop out until the voltage is quite low, so plan your control logic accordingly. Coil resistance is 33.7 ohms inrush and 5453 ohms holding at 20 °C. The inrush current at 140 V DC is about 4.15 A, dropping to roughly 26 mA once the contactor is sealed. That's a standard low-consumption profile — the holding power is under 4 W, so it won't cook the panel, but the inrush pulse needs a power supply that can deliver the peak without drooping. Operating time is 30 to 40 ms closing and 30 to 50 ms opening. That's typical for a TeSys contactor of this frame size — fast enough for most motor starting and general switching, but not a high-speed transfer switch. If you're timing interlocking or sequencing, account for the full 50 ms opening spread.

Deployment context

This coil mounts into the TeSys contactor frame — it's a direct replacement for the original coil in the corresponding contactor.

MPN
LX4FF140