Skip to main content
Schneider Electric LX4FF350

TeSys LX4FF350 Contactor Coil, 350 V DC, Obsolete

MPN LX4FF350
Obsolete

Schneider Electric TeSys LX4FF350 contactor coil, 350 V DC, DC low consumption, 30-40 ms closing, 30-50 ms opening.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4FF350 specifications
ParameterValue
Control circuit typeDC low consumption
Main product or component typeContactor coil
Coil voltage350 V DC
Temp operating max55 °C
Temp operating min-5 °C
Operating time30...40 ms closing 30...50 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX4FF350 is a replacement contactor coil from the Schneider Electric TeSys range, designed for DC control circuits at 350 V DC. It's a DC low-consumption coil with no built-in suppressor module, so you'll need to add external flyback suppression if the circuit demands it. Closing time runs 30 to 40 ms; opening takes 30 to 50 ms. The coil holds at 350 V DC nominal, with an operational range of 0.85 to 1.1 Uc (298 to 385 V DC) at 55 °C, and drops out between 0.15 and 0.2 Uc (52.5 to 70 V DC). Ambient operating temperature is -5 to 55 °C.

No official successor order code appears in the lifecycle record. If you're filling a service spare or a line-down replacement, the safest route is to source a sealed surplus unit against an RFQ. Condition is everything here — verify the coil hasn't been sitting in a damp warehouse for a decade.

The 350 V DC control voltage is specific — this isn't a 24 V or 110 V coil. If your panel runs a 350 V DC control bus, this coil drops right in. If not, you'll need a different coil from the TeSys FF family or an external DC-DC converter. The 30-40 ms closing time is typical for a contactor of this size; it's not a fast-switching application like a DC drive precharge. The coil's average holding resistance is 34,910 ohms at 20 °C, with an inrush resistance of 199.7 ohms. That inrush-to-hold ratio is normal for a DC coil — the initial current spike is about 175 times the holding current, so make sure your control transformer or DC supply can handle the surge without dropping out.

MPN
LX4FF350