Skip to main content
Schneider Electric LX4FG055

Schneider TeSys LX4FG055 Contactor Coil, 55 V DC, Obsolete

MPN LX4FG055
Obsolete

Schneider Electric TeSys LX4FG055, contactor coil, 55 V DC, DC wide range, 30...40 ms closing, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4FG055 specifications
ParameterValue
Control circuit typeDC wide range
Main product or component typeContactor coil
Coil voltage55 V DC
Temp operating max55 °C
Temp operating min-5 °C
Operating time30...40 ms closing 30...50 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

The Schneider Electric TeSys LX4FG055 is a replacement contactor coil designed for the FG series of contactors. It operates on a 55 V DC control circuit, drawing an inrush current through a 3.87 Ohm coil resistance at 68 °F (20 °C) before settling to a holding current through the 904.1 Ohm holding resistance at the same temperature. The coil lacks a built-in suppressor module, so external flyback diode or RC snubber protection is required on the control circuit to prevent voltage spikes during de-energization.

Electrical characteristics and operating envelope

The coil's operating time is specified at 30...40 ms for closing and 30...50 ms for opening. The control circuit is classified as DC wide range, with operational voltage limits of 0.85...1.1 Uc (46.75...60.5 V DC) at 131 °F (55 °C) and a drop-out threshold of 0.15...0.2 Uc (8.25...11 V DC) at the same temperature. Ambient air temperature for operation is rated from 23...131 °F (-5...55 °C). These limits define the reliable pick-up and drop-out envelope; operation outside these ranges risks partial stroke or failure to hold.

This coil mounts directly onto the FG series contactor armature. The DC wide-range control circuit requires clean DC supply; verify the power supply can deliver the inrush current without voltage sag below the 0.85 Uc pick-up threshold. Because the coil has no built-in suppressor, the panel builder must install a freewheeling diode across the coil terminals, polarity-observed, to protect the control circuit PLC output or relay contact from inductive kickback.

MPN
LX4FG055