Skip to main content
Schneider Electric LX9FH0852

TeSys LX9FH0852 contactor coil, 85 V AC, 560-660 VA inrush

MPN LX9FH0852
Obsolete

TeSys F, specific contactor coil, LX9FH0852, 85 V AC 40-400 Hz low consumption, 560-660 VA inrush.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FH0852 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption
Main product or component typeSpecific contactor coil
Coil voltage85 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time25 ms opening 45 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX9FH0852 is a specific replacement coil for TeSys F contactors, part of the TeSys range. It's a low-consumption AC coil rated at 85 V AC, 40-400 Hz, designed to swap into the contactor's magnetic assembly when the control voltage needs to match a 85 V AC supply. The coil pulls 560-660 VA inrush at 20 °C, then settles to 8-10 VA holding. That inrush figure matters for the control transformer sizing. Opening time is 25 ms, closing 45 ms. For a contactor coil that's standard speed — fast enough for motor starts, not a high-speed transfer switch.

No built-in suppressor module on this variant. If your application needs coil surge suppression (for PLC output protection or reduced EMI), you'll add an external RC snubber or varistor across the coil terminals.

Control voltage limits and thermal behavior

Operational range is 0.85-1.1 Uc at 55 °C, so the coil holds in from about 72 V to 94 V AC. Drop-out happens between 0.35-0.55 Uc, roughly 30-47 V AC. That's a standard margin — the contactor won't drop out on a brownout that stays above 50 V. Heat dissipation runs 8.4-10.4 W once the coil is sealed in. That's not trivial in a crowded panel — if you're grouping several TeSys F contactors in a small enclosure, factor the combined dissipation into your thermal budget. That's about one operation per second — fine for most motor starting and process control, but not for high-speed counting or rapid cycling.

MPN
LX9FH0852