Skip to main content
Schneider Electric LX9FK916

TeSys LX9FK916 specific contactor coil, 35..38 V DC, obsolet

MPN LX9FK916
Obsolete

TeSys F specific contactor coil, LX9FK916, 35..38 V DC low consumption, obsolete status.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FK916 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption DC low consumption
Main product or component typeSpecific contactor coil
Coil voltage35...38 V DC
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time60 ms opening 50 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The TeSys LX9FK916 is a specific contactor coil for the TeSys F contactor range, designed to operate on a 35...38 V DC control circuit with low consumption. It draws an inrush power of 550 VA at 20 °C and holds in at 31 VA, with a heat dissipation of 15...18.3 W during continuous operation.

The 35...38 V DC control voltage is the nominal operating band — the coil will pick up reliably between 0.85 and 1.1 Uc (roughly 30 to 42 V DC at 55 °C) and drops out between 0.3 and 0.5 Uc (about 10.5 to 19 V DC). That dropout margin is what keeps the contactor from chattering on a sagging 24 V bus. Opening time is 60 ms, closing 50 ms — fast enough for most motor start/stop sequences but not for high-speed jogging. The 3600 cycles/hour maximum at 70 °C matches typical conveyor or pump duty.

For a BOM replacement, the closest functional match would be a TeSys F coil with the same 35...38 V DC rating and low-consumption design, but pinout and mounting footprint should be verified against the existing contactor.

As a specific coil for the TeSys F range, it mounts directly onto the contactor's magnet system — no adapter plate needed. The coil technology is without built-in suppressor module, so if your circuit requires flyback suppression (e.g., PLC-driven outputs), you'll need an external RC snubber or diode across the coil terminals.

MPN
LX9FK916