Skip to main content
Schneider Electric LX9FL918

TeSys LX9FL918 specific contactor coil, 48 V DC low consumpt

MPN LX9FL918
Active

TeSys F, specific contactor coil, LX9FL918, 48 V DC low consumption, 48 W hold-in, 733 W inrush.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FL918 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption DC low consumption
Main product or component typeSpecific contactor coil
Coil voltage48 V DC 48 V AC
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles5 Mcycles
Operating time60 ms opening 20 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX9FL918 is a specific contactor coil from the TeSys F range, designed as a replacement or spare coil for TeSys F contactors. It operates on a 48 V DC control circuit, with a low-consumption design that draws 48 W holding power at 68 °F (20 °C) and an inrush of 733 W at the same temperature. The coil has no built-in suppressor module, so you'll need to add external suppression if the control circuit demands it.

Control voltage is 48 V DC (also rated for 48 V AC), with operational limits of 0.85 to 1.1 Uc at 131 °F (55 °C) — meaning the coil will pick up reliably as low as 40.8 V DC and as high as 52.8 V DC at that temperature. Drop-out voltage is 0.3 to 0.5 Uc, so the contactor drops out between 14.4 V and 24 V DC. That's a wide dropout band; if your control supply sags, the coil stays pulled in longer than a tighter-band coil would. Opening time is 60 ms, closing time 20 ms. That's typical for a contactor coil in this class — fast enough for motor starting, but not for high-speed cycling applications. Maximum operating rate is 1800 cycles per hour at 158 °F (70 °C), which works out to one operation every two seconds. Mechanical durability is rated at 5 million cycles, so the coil itself isn't the wear item in most installations. Heat dissipation runs 22.8 to 27.8 W. That's the heat the coil dumps into the enclosure.

MPN
LX9FL918