Skip to main content
Schneider Electric LXM16MU04M2X

Schneider Electric LXM16MU04M2X Servo Drive, 0.4 kW

MPN LXM16MU04M2X
Active

Schneider Electric Easy Lexium 16 LXM16MU04M2X motion servo drive, 0.4 kW at 220 V, single-phase 200-240 V, 4.5 A line current, 8 kHz switching frequency, compact housing, Modbus.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXM16MU04M2X specifications
ParameterValue
Main product or component typeMotion servo drive
Voltage1000...2000 m with current derating
Current4.5 A 185.3 % at 220 V, single phase
Frequency8 kHz

Product details

What the 4.5 A line current means for your branch circuit

The LXM16MU04M2X draws 4.5 A line current at 185.3 % of rated load under 220 V single-phase supply — this is the peak draw during acceleration or overload, not the steady-state run current. Size the branch circuit protection and upstream contactor for this peak, not the 2.6 A continuous output current. Continuous output current is 2.6 A at 220 V, delivering 400 W continuous power. The 3-second peak output current of 10 A at 220 V handles short-duration torque demands without tripping.

Single-phase supply and switching frequency trade-offs

Runs on a 200-240 V single-phase network (supply voltage limits -15 % / +10 %), 50/60 Hz ±5 %. The 8 kHz switching frequency is fixed — no derating needed for standard motor noise suppression, but the drive's compact housing limits heatsink area, so ambient temperature derating applies above 40 °C. Maximum leakage current is 3.5 mA — plan for a residual-current device (RCD) type A or B if local code requires it, especially on shared GFCI-protected circuits.

MPN
LXM16MU04M2X