Skip to main content
Schneider Electric LXM18MPDU60N4X

LXM18MPDU60N4X Lexium 18 servo drive, 6.0 kW

MPN LXM18MPDU60N4X
Active

Schneider Electric Easy Lexium 18 servo drive, LXM18M family, 6.0 kW at 380–440 V three-phase, 20.8 A continuous output, PTI/PTO plus Modbus, compact housing.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXM18MPDU60N4X specifications
ParameterValue
Main product or component typeMotion servo drive
Current16 A at 380...440 V, three phase
Frequency8 kHz
IP ratingIP20
Temp operating max45 °C
Temp operating min0 °C
Depth230 mm
Width90 mm
Height250 mm
Operating temperature0...45 °C

Product details

Active production, quoted to the BOM line

The LXM18MPDU60N4X: Pricing and lead time on this code are confirmed at RFQ; the storefront is not the factory channel and does not represent itself as one — what the buyer sees on a stock tile and a same-day fulfilment promise is intentionally absent from this listing.

What the 6.0 kW and 20.8 A figures actually govern

Nominal power is 6.0 kW at 380–440 V across an 8 kHz switching loop, sized to the drive's continuous output current of 20.8 A at that same 8 kHz; an integrator should size the servo motor's continuous torque to the 20.8 A figure rather than the headline kW number, because the kW is the mechanical shaft output and the A figure is the electrical ceiling the IGBTs actually hold at the carrier. Line-side draw is 16 A at 380–440 V three-phase, and the 3-second peak output of 55 A is the accelerating margin above continuous — fast traverse and acceleration bursts draw on this peak, then decay back to the 20.8 A envelope. Supply tolerance is 342–484 V three-phase over a 50/60 Hz window of 47.5–63 Hz, which covers US 380/400/440 V plant supplies without a step-up transformer — handy on retrofit lines where the existing feeder is the binding constraint.

Cabinet footprint and thermal envelope

Operating temperature is rated 0…45 °C up to 1000 m altitude without derating; cabinet cooling has to hold the enclosure inside that envelope — the drive's IP20 rating means it is for a sealed electrical room, not a washdown station.

Command interface: Modbus plus PTI/PTO, no onboard EMC filter

Command paths are Modbus with integrated digital I/O, analog I/O, and PTI/PTO pulse terminals — PTI/PTO is the path typically used to follow a master-axis encoder or step/direction source, and Modbus is the commissioning and parameter channel; no fieldbus option slot is enumerated in the spec row, so expansion modules are off the table on this build. The drive ships without an onboard EMC filter, so the cabinet has to provide compliance to CE by other means — typically a line filter mounted upstream of the drive on the same backplate, sized to the 16 A line draw; the absence of a filter is not a defect, just a configuration decision the panel builder owns.

Compliance documentation

Listed standards entry shows CE marking; specific UL, CSA, REACH, or RoHS document bundles are not enumerated on the spec record, so the buyer should request the manufacturer's declaration of conformity at the RFQ stage rather than assume a regional file is on hand.

MPN
LXM18MPDU60N4X