Skip to main content
Schneider Electric LXM18MPDU75N4X

Schneider LXM18MPDU75N4X Servo Drive, 7.5 kW, 380-440 V

MPN LXM18MPDU75N4X
Active

Schneider Easy Lexium 18 LXM18MPDU75N4X motion servo drive, 7.5 kW nominal at 380-440 V three phase, 25.7 A continuous, Modbus.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXM18MPDU75N4X specifications
ParameterValue
Main product or component typeMotion servo drive
Current21 A at 380...440 V, three phase
Frequency8 kHz
IP ratingIP20
Temp operating max45 °C
Temp operating min0 °C
Depth230 mm
Width90 mm
Height250 mm
Operating temperature0...45 °C

Product details

7.5 kW at 380-440 V — what the headline numbers mean on the Lexium 18

The Schneider LXM18MPDU75N4X is a motion servo drive in the Easy Lexium 18 family (device short name LXM18M), listed at 7.5 kW nominal power on a 380-440 V three-phase supply and rated 25.7 A continuous output current at the 8 kHz switching frequency. That 25.7 A continuous figure is the rating the integrator sizes the cabinet and the upstream breaker against, while the 65 A 3-second peak lets the drive handle accel/decel surges on cyclic loads without tripping. Line current draws 21 A at 380-440 V three phase, so on a 400 V industrial service this sits comfortably on a 32 A breaker and leaves margin for the inrush during pre-charge.

Mains input envelope and supply limits

Supply voltage limits are 342-484 V three phase, matching the 380-440 V -10...10 % rated window, with 50/60 Hz tolerance of -5...5 % and a network frequency acceptance of 47.5-63 Hz — the drive tolerates the wobble seen on a plant bus without dropping out.

Interface mix: Modbus, digital/analog I/O, PTI and PTO

The drive carries Modbus plus integrated digital I/O, analog I/O, PTI (pulse-train input) and PTO (pulse-train output) on the same unit — a position-following machine can wire step/direction into PTI and echo the encoder through PTO without an extra indexer card.

Cabinet footprint, thermal envelope and EMC posture

IP20 rating means the drive goes inside an enclosed cabinet, not on the machine surface, and ambient operation is 0...45 °C with no condensation — the standard panel-internal envelope.

MPN
LXM18MPDU75N4X