Skip to main content
Schneider Electric LXM18PDU20M3X

Schneider Electric LXM18PDU20M3X Easy Lexium 18 Servo Drive

MPN LXM18PDU20M3X
Active

Schneider Electric Easy Lexium 18 LXM18PDU20M3X motion servo drive, 2 kW nominal power, 220-240 V three-phase, 18.5 A continuous at 8 kHz, IP20, compact housing.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXM18PDU20M3X specifications
ParameterValue
Main product or component typeMotion servo drive
Current13.2 A 132.4 % at 220...240 V, three phase
Frequency8 kHz
IP ratingIP20
Temp operating max45 °C
Temp operating min-5 °C
Depth191.8 mm
Width208 mm
Height93 mm
Operating temperature-5...45 °C

Product details

Power delivery and current capability at the switching frequency

The LXM18PDU20M3X: Rated 2 kW nominal power at 220-240 V three-phase with an 8 kHz switching frequency, this drive delivers 18.5 A continuous output current at that carrier rate. The 3-second peak output current of 42 A supports the inrush needed for accelerating a load from standstill — roughly 2.3× the continuous rating, which is typical for servo drives handling high-inertia loads like rotary tables or unwinders. Line current draw is 13.2 A at 220-240 V three-phase, so the upstream branch circuit and contactor must be sized for that continuous draw plus the peak transient.

Supply voltage tolerance and frequency range

Operates on a three-phase 220-240 V supply with a -15% / +10% tolerance window (170-255 V), which covers the typical European and Asian low-voltage industrial networks. Supply frequency acceptance is 50-60 Hz ±5%, with the internal network frequency range extending to 47.5-63 Hz — adequate for generator-backed or weak-grid installations where frequency can drift.

Communication and I/O architecture

The drive integrates Modbus serial communication alongside digital and analog I/O, plus PTI (pulse train input) and PTO (pulse train output) for direct connection to a motion controller or PLC without an external interface module. Two analog inputs are available for speed or torque reference signals from a potentiometer or analog output card.

Environmental limits and derating

Rated for ambient air temperatures from -5°C to 45°C — above 45°C the drive must be derated or actively cooled; the 0-1000 m altitude limit means no derating is needed at most industrial sites, but installations above 1000 m require a power reduction per IEC 61800-2.

EMC filter consideration

This variant ships without an integrated EMC filter, so an external filter must be added at the input to meet conducted emission limits for CE or UKCA compliance — factor the filter cost and panel space into the BOM.

MPN
LXM18PDU20M3X