Skip to main content
Schneider Electric MH30701P16F2200

Schneider Electric MH30701P16F2200 Servo Motor with Brake

MPN MH30701P16F2200
Active

Schneider Electric MH3 series servo motor with brake, MH30701P16F2200, 930 W continuous power, 1.38 Nm nominal torque, 1250 rpm nominal speed, three-phase, IP65, single-turn SinCos Hiperface encoder, 70 mm flange.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30701P16F2200 specifications
ParameterValue
Encoder typeSingle turn SinCos Hiperface
Shaft end typeParallel key
Main product or component typeServo motor
IP ratingIP65
Length6.3 in (161 mm)
Shaft diameter0.4 in (11 mm)
Max radial force fr n660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

930 W continuous power, 1.38 Nm — the real-world duty point

The MH30701P16F2200 is a Schneider Electric MH3 series servo motor with a holding brake, rated for 930 W continuous power and 1.38 Nm nominal torque at 1250 rpm. That 1.38 Nm is the torque the motor can deliver continuously without overheating — the number that governs your duty cycle on a conveyor or spindle, not the peak figure. Three-phase winding, IP65-rated body, and a single-turn SinCos Hiperface encoder mean this motor is built for position-feedback applications in washdown or dusty environments — think food processing, packaging, or machine tool axes where you need both torque and positional accuracy.

Torque and speed envelope — what the ratings actually allow

Peak stall torque hits 4.2 Nm across the 115–480 V three-phase range — that's the torque available for acceleration or breaking a stuck load, but it's limited by the drive's current capability and thermal time constant, not a continuous figure. Nominal speed is 1250 rpm, but the motor can spin up to 7000 rpm depending on the drive and supply voltage (LXM52/LXM62 drives at 480 V three-phase). The torque constant is 0.79 Nm/A at 120 °C copper temperature — use that to size the drive's continuous current rating against your load's torque demand.

Mounting and integration — 70 mm flange, IP65, right-angle connectors

International standard flange, 70 mm square, with a 60 mm centring collar and 5.5 mm mounting holes. The 2.5 mm centring collar depth locates the motor precisely on the machine frame — no shimming needed if the pilot bore is within tolerance. Rotatable right-angle electrical connectors let you route the power and feedback cables close to the motor body — useful in tight enclosures or when the motor mounts vertically and the cable needs to exit downward.

Sourced through independent distribution channels against an RFQ.

MPN
MH30701P16F2200