Skip to main content
Schneider Electric MH30701P17F2200

Schneider Electric MH30701P17F2200 Servo Motor with Brake

MPN MH30701P17F2200
Obsolete

Schneider Electric MH30701P17F2200 MH3 series servo motor with brake, three-phase, 930 W continuous power, 5500 rpm nominal speed, 3 N.m holding brake, IP65, multiturn SinCos Hiperface encoder, 70 mm flange.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30701P17F2200 specifications
ParameterValue
Encoder typeMultiturn SinCos Hiperface
Shaft end typeParallel key
Main product or component typeServo motor
IP ratingIP65
Length6.3 in (161 mm)
Shaft diameter0.4 in (11 mm)
Max radial force fr n660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

What this servo motor delivers for a motion axis

The MH30701P17F2200 is a three-phase servo motor from the MH3 series, delivering 930 W continuous power at 5500 rpm nominal speed — suited for high-speed pick-and-place, small conveyor drives, or packaging machine axes where cycle time matters more than brute torque. Nominal torque depends on the drive voltage: 1.38 N.m with a Lexium 52/62 at 115 V three-phase, dropping to 1.27 N.m at 480 V three-phase. The peak stall torque of 4.2 N.m covers acceleration and breakaway friction without oversizing the motor frame. The integrated holding brake holds 3 N.m — enough to keep a vertical axis stationary when the drive is disabled, eliminating the need for an external mechanical brake or Z-axis counterbalance.

Encoder feedback and absolute positioning

A multiturn SinCos Hiperface encoder provides absolute position feedback — no homing sequence on power-up, which shaves seconds off each machine start and avoids collision risks during reference runs. The encoder resolution supports the 5500 rpm top speed without aliasing; the SinCos analog track gives sub-micron position interpolation when paired with a compatible Lexium drive.

Mounting, cooling, and environmental sealing

The motor mounts on an international standard flange with a 70 mm square face and 5.5 mm mounting holes — fits common servo gearbox and machine-frame patterns without adapter plates. IP65 standard sealing means the motor body and connector interface withstand washdown and airborne dust — suitable for food processing, beverage filling, or packaging lines where hose-down cleaning is routine. Cooling is by natural convection — no fan or external blower needed, which simplifies wiring and eliminates a failure point. The rotatable right-angled connectors let the cable exit in any of four orientations, easing routing in tight cable trays or drag chains.

Bearing load and radial force limits

Maximum permissible radial force on the shaft end derates with speed: 660 N at 1000 rpm, 520 N at 2000 rpm, down to 360 N at 6000 rpm. A belt-driven or direct-coupled load exceeding this curve at the operating speed will shorten bearing life — the curve is the limit for L10 life under continuous duty. The shaft is 11 mm diameter with a parallel key and 23 mm usable length — standard for coupling to small gearboxes or timing-belt pulleys in this power class.

Sourcing and lifecycle status

No pin-compatible alternative exists within the MH3 family — the MH30701P17F2200 is the specific variant with the 3 N.m brake and Hiperface encoder.

MPN
MH30701P17F2200