Skip to main content
Schneider Electric MH30702P02F2200

Schneider Electric MH30702P02F2200 Servo Motor with Brake

MPN MH30702P02F2200
Active

Schneider Electric MH3 series servo motor with brake, MH30702P02F2200, three-phase, 1380 W continuous power, 5500 rpm nominal speed, 2.37 N.m nominal torque, multiturn SinCos Hiperface encoder, IP65, smooth shaft.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30702P02F2200 specifications
ParameterValue
Encoder typeMultiturn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
IP ratingIP65
Length7.6 in (193 mm)
Shaft diameter0.4 in (11 mm)
Centring collar diameter2.4 in (60 mm)

Product details

The MH30702P02F2200 delivers 1380 W continuous power at 5500 rpm nominal speed, with a nominal torque of 2.37 N.m (20.98 lbf.in) when paired with an LXM52 or LXM62 drive at 115 V three-phase supply — the torque curve shifts slightly at higher line voltages: 2.23 N.m at 230 V single-phase, 2.01 N.m at 400 V three-phase, and 1.89 N.m at 480 V three-phase. Peak stall torque reaches 7.4 N.m (65.5 lbf.in) across the 115–480 V three-phase range, and the maximum current Irms is 9.65 A — this gives the servo headroom for acceleration transients without saturating the drive.

Built-in holding brake and encoder feedback

The motor includes a holding brake with 3 N.m (26.6 lbf.in) holding torque and 7 W pull-in power — enough to hold a vertical axis load at standstill without servo power, and the low power draw keeps the thermal budget tight in the junction box. Feedback comes from a multiturn SinCos Hiperface encoder — a single-cable absolute position protocol that eliminates a separate encoder cable and reduces wiring complexity on the moving axis. The encoder type and the rotatable right-angled connectors simplify cable routing in tight cabinet layouts; the IP65 rating means the motor body withstands washdown and dust ingress without an additional enclosure.

Mechanical interface and mounting

The motor uses an international standard flange with a 70 mm (2.8 in) flange size and a 60 mm centring collar diameter — mounts directly to standard servo gearboxes and linear actuators without an adapter plate. Shaft is smooth, 11 mm diameter, 23 mm long; the centring collar depth is 2.5 mm. Maximum radial force at the shaft nose is 710 N at 1000 rpm, derating to 390 N at 6000 rpm — relevant for belt-drive or overhung load applications where bearing life depends on radial load.

MPN
MH30702P02F2200