Skip to main content
Schneider Electric SH30701P01A1100

Schneider SH30701P01A1100 Servo Motor, 690 W, 1.4 Nm

MPN SH30701P01A1100
Obsolete

Schneider Electric SH30701P01A1100 SH3 series servo motor, 690 W continuous power, 1.4 Nm nominal torque, 8000 rpm max mechanical speed, absolute single-turn SinCos Hiperface encoder, IP65, smooth shaft, no brake.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

SH30701P01A1100 specifications
ParameterValue
Shaft end typeSmooth shaft
Main product or component typeServo motor
Length6.06 in (154 mm)
Shaft diameter0.4 in (11 mm)
Max axial force fa n80 N
Centring collar diameter2.4 in (60 mm)

Product details

Supply voltage drives the speed-torque envelope

The SH30701P01A1100: This motor delivers different performance depending on the supply. On three-phase 400 V it reaches 6000 rpm nominal and 820 W output; on 480 V three-phase it hits 7200 rpm and 950 W. Single-phase 115 V or 230 V limits the nominal speed to 1500 rpm or 3000 rpm respectively, with output power dropping to 220 W or 440 W. Nominal torque holds at 1.4 N.m on single-phase supplies but drops to 1.1 N.m on three-phase 400 V and 480 V. Continuous stall torque is 1.25 N.m across the three-phase range (115–480 V), with a continuous stall current of 1.8 A. Peak stall torque reaches 3.5 N.m, drawing 5.7 A for up to 3 seconds — useful for acceleration or overcoming static friction.

Encoder, feedback, and integration constraints

The absolute single-turn SinCos Hiperface encoder gives position feedback at power-up without a homing cycle — the drive reads the absolute position directly. This saves time on multi-axis machines where each axis must re-home after a power cycle if using incremental encoders. Smooth shaft (no keyway) with 11 mm diameter and 23 mm shaft length; the coupling must be a clamping type. No holding brake — the load must be held by the drive's holding torque or an external brake. IP65 rating on the motor body and shaft bushing means it withstands washdown in food or packaging lines, but the rotatable right-angle connector must be properly seated to maintain the seal.

MPN
SH30701P01A1100