Skip to main content
ABB 1SFA896205R7000

ABB 1SFA896205R7000 PSRC9 Soft Starter, 208-600 V AC

MPN 1SFA896205R7000
Active

ABB PSRC9 series soft starter, order code 1SFA896205R7000, voltage-ramp soft start, 208-600 V AC, 4xIe for 6 s, screw terminals, current lifecycle.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SFA896205R7000 specifications
ParameterValue
Terminal typeScrew Terminal
Voltage208 ... 600 V AC
Frequency50/60 Hz
ProtocolFiledBusPlug(Optional)
Temp operating max60 °C
Temp operating min-25 °C

Product details

The ABB 1SFA896205R7000 is a PSRC9-series soft starter that uses a voltage-ramp start profile to reduce inrush current and mechanical shock on three-phase induction motors. It operates on a 208-600 V AC supply at 50/60 Hz, with a fixed ramp time and a starting capacity of 4x the rated motor current Ie for 6 seconds — enough for most centrifugal pumps, fans, and light-conveyor starts that don't need a current-limit function. Control power is separate: the unit accepts 100-240 V AC for the main control supply and a 24 V DC control circuit for the logic interface. A green LED indicates running, ramping, and completed-start states. The run signal relay is present; there is no fault, by-pass, or overload signal relay onboard.

No official replacement or successor order code is published. The PSRC9 family remains active, so the 1SFA896205R7000 is the current build for this rating.

Integration notes

Terminals are screw-type: main circuit accepts 2 x 0.75-1.5 mm² rigid, control circuit 1 x 0.75-2.5 mm² rigid. Tighten control-circuit terminals to 1 N·m (8.9 in·lb). The optional FiledBusPlug communication module can be added for network integration, but the base unit has no onboard fieldbus. There is no integrated electronic overload protection. The manufacturer recommends an external MS116 manual motor starter set to 6.30-10.00 A as the overload device. The soft starter's IP20 finger-safe terminals suit enclosure-mounting; the unit itself is not rated for washdown environments.

MPN
1SFA896205R7000