Skip to main content
ABB 1SFA897114R7001

ABB PSE300 Soft Starter 1SFA897114R7001, 208-600 VAC, Modbus

MPN 1SFA897114R7001
Active

ABB PSE300 soft starter, order code 1SFA897114R7001, soft start with torque control, 208-600 V AC, Modbus-RTU, built-in electronic overload protection.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SFA897114R7001 specifications
ParameterValue
Terminal typeMain Circuit: Bars
Voltage208 ... 600 V AC
Frequency50/60 Hz
ProtocolModbus-RTU
Temp operating max60 °C
Temp operating min-25 °C

Product details

The ABB PSE300 1SFA897114R7001 is a soft starter with torque control, built for three-phase induction motors on 208–600 V AC lines. Ramp time is adjustable 0–30 s, with initial voltage set 30–70 % and current limit 1.5–7× Ie. Communication rides Modbus-RTU, so it drops into a PLC network without a separate gateway. Control supply is 100–250 V AC; the separate 24 V DC control circuit handles the logic side.

Main circuit terminals are bars with an 8.5 mm hole — expect lug-type connections. Control circuit terminals accept rigid 1 x 2.5 mm² wire; tighten to 0.5 N·m. Main terminals are IP00 — the unit lives inside an enclosure.

Built-in electronic overload protection covers locked rotor, current underload, and EOL. Three signal relays (run, fault, bypass, overload) give discrete feedback to the controller. Analog output is 4–20 mA for current or torque monitoring. Status LEDs: green for running/ramping, red for fault, yellow for protection trip.

MPN
1SFA897114R7001