Skip to main content
ABB ACS180-04N-07A2-4

ABB ACS180-04N-07A2-4 LV AC Drive Module, 380-480 V, R1

MPN ACS180-04N-07A2-4

ABB ACS180 series LV AC machinery drive module, 380–480 V three-phase input, R1 frame, IP20 open type, MODBUS, 2 analog inputs and 1 analog output.

$285.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ACS180-04N-07A2-4 specifications
ParameterValue
Input voltage380 ... 480 V
Frequency47 ... 63 Hz
Phases3-phase
IP ratingIP20
ProtocolMODBUS
MountingModule
Width70 mm
Height220 mm
Weight1.24 kg
Frame sizeR1

Product details

The ABB ACS180-04N-07A2-4 is a low-voltage AC machinery drive module built around the ACS180 family, taking a 3-phase 380–480 V supply at 47–63 Hz and packaged as a module-mount R1 frame in an IP20 open-type enclosure. The class is the compact end of ABB's general-purpose machinery drive line, sized for panel builders who need a small-footprint converter on a 3-phase industrial bus without a full cabinet.

Line-side electrical envelope

The supply window is 380–480 V across 47–63 Hz on a 3-phase input, with a 0.98 power factor at the line side, so the drive presents a near-unity reactive load to the feeder. The rating is stated for installations up to 2000 m altitude, which is the standard derating knee for LV drives — above that, output current has to be trimmed per the curve.

Control-side I/O and fieldbus

Control wiring lands on 2 analog inputs and 1 analog output, with MODBUS as the listed communication protocol — enough for a Modbus RTU/TCP master to parameterise the drive and read back process variables, and a typical fit where the ACS180 is dropped into a small Modbus cell next to a PLC. No other fieldbus is on the spec line, so a PROFINET or EtherNet/IP gateway would have to be added externally if the upstream controller expects it.

MPN
ACS180-04N-07A2-4