Skip to main content
Schneider Electric A9C15488

Schneider Electric A9C15488 Acti9 TL Impulse Relay, 1P 16A 2

MPN A9C15488
Obsolete

Schneider Electric Acti9 TL impulse relay, A9C15488, 1P, 1NO, 16 A rated current, 230 V AC 50 Hz coil, DIN rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C15488 key specifications
ParameterValue
Control typeRemote and manual control
Control signal typeImpulse
Main product or component typeImpulse relay
Voltage250 V AC 50 Hz
Coil voltage230 V AC 50 Hz
Frequency5 switching operations/minute
Poles1P
Temp storage max80 °C
Temp storage min-40 °C
Temp operating max50 °C
Temp operating min-20 °C
Storage temperature-40...80 °C

All specifications

A9C15488 additional specifications
ParameterValue
Pollution degree3
Depth60 mm
Width18 mm
Height84 mm
Electrical life cyclesAC-22: 200000 cycles
ApplicationStandard
Operating temperature-20...50 °C

Product details

The Schneider Electric A9C15488 is an Acti9 TL impulse relay — a 1-pole, 1-NO contact device rated for 16 A at 250 V AC, controlled by a 230 V AC 50 Hz impulse coil. It switches a load on or off each time it receives a pulse from a remote push button or control system, and the local ON/OFF indicator gives immediate visual confirmation of contact state. Rated for 200,000 electrical cycles under AC-22 duty (resistive and mixed loads), this relay is built for the switching frequency of lighting or general load control — up to 5 operations per minute. The 16 A rating covers standard lighting circuits and small motorized loads within the AC-22 envelope.

The fixed mounting support means it stays put once clipped in; no additional bracket hardware needed. Terminal access is tunnel-type, accepting 1 to 4 mm² rigid or flexible cable on the power side, and 0.5 to 1.5 mm² on the control side. IP20 on the opening (finger-safe when wired), IP40 when installed inside an enclosure.

Compliance with IEC 60669-1 and IEC 60669-2-2 (switches for household and similar fixed electrical installations) covers residential and light commercial applications. The NF quality mark indicates French national certification for safety and performance.

MPN
A9C15488