Skip to main content
Schneider Electric A9N60782

Schneider Electric A9N60782 Acti9 C120H MCB, 100 A, 2P, C Cu

MPN A9N60782
Obsolete

Schneider Electric Acti9 C120H miniature circuit breaker, A9N60782, 2P, 100 A, C curve, 15 kA Icu at 230-400 V AC, thermal-magnetic trip, clip-on DIN rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9N60782 key specifications
ParameterValue
Control typeToggle
Trip unit typeThermal-magnetic
Main product or component typeMiniature circuit-breaker
Voltage230...400 V AC 50/60 Hz
Insulation voltage ui500 V AC 50/60 Hz conforming to EN/IEC 60947-2
Breaking capacity15 kA Icu at 15 kA Icu at 230...400 V AC 50/60 Hz conforming to EN/IEC 60947-2
IP ratingIP20
Temp storage max80 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-30 °C
Storage temperature-40...80 °C

All specifications

A9N60782 additional specifications
ParameterValue
Pollution degree3 conforming to IEC 60947-2
ColorWhite
Depth73 mm
Width54 mm
Height81 mm
Electrical life cycles5000 cycles
Mechanical life cycles20000 cycles
ApplicationDistribution
Operating temperature-30...70 °C

Product details

The Schneider Electric A9N60782 is an Acti9 C120H miniature circuit breaker rated 100 A at 40 °C with a C curve (magnetic trip at 8 x In ±20 %). The 2-pole configuration protects both phase conductors in a single-phase or split-phase circuit. The thermal-magnetic trip unit combines a bimetal element for overload protection (time-delayed, inversely proportional to current) with a solenoid for short-circuit protection (instantaneous above 800 A for this 100 A unit). The C curve is the standard choice for general distribution loads — lighting, small motors, resistive heaters — where inrush currents are moderate. For highly inductive loads like large transformers or motor starters, a D curve would be more appropriate; for purely resistive loads, a B curve offers tighter protection.

Occupies 6 x 9 mm pitches (54 mm width) in the enclosure. Tunnel-type terminals accept 1-50 mm² rigid or 1.5-35 mm² flexible conductors; tighten to 3.5 N·m. Strip 15 mm of insulation.

MPN
A9N60782