Skip to main content
Schneider Electric ATV1200A106001010

Schneider Electric ATV1200A106001010 AC Drive, 8862 kW

MPN ATV1200A106001010
Obsolete

Schneider Electric Altivar 1200 ATV1200A106001010 AC drive, 8862 kW motor power, 10600 kVA, 2970...3630 V supply, 48-pulse diode rectifier, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A106001010 specifications
ParameterValue
Input type48 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current720 A
IP ratingIP31 / IP41 / IP42
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1600 mm (standard efficiency)
Width14480 mm (standard efficiency)
Height3040 mm standard efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

Overload profile and fault handling for mill duty

The ATV1200A106001010: Overload withstand is specified at 1.2 In for 60 s (standard overload) and 1.5 In for 3 s, with a high-overload tier at 1.5 In for 60 s and 1.85 In for 3 s — this drive handles sustained and transient overloads typical of rolling mill and crusher applications. Prospective line Isc is rated at 31.5 kA for 150 ms, so the drive can ride through a bolted fault on the incoming line without immediate damage, provided upstream protection coordinates within that window. Ground fault protection is integrated into the drive, and electrical isolation between power and control circuits is standard — both reduce nuisance trips and simplify troubleshooting in high-ambient, high-EMI environments.

Floor-standing build with forced convection cooling

The drive is assembled in a floor-standing enclosure with separate air flows for the power section and control compartment, a design that keeps heat from the 140000 m3/h cooling air volume away from the electronics. Forced convection cooling is standard. Operating position is vertical ±10 degrees; altitude derating begins at 1000 m (0.6 % per 100 m up to 2000 m). Pollution degree 2 per EN/IEC 61800-5-1 applies, so the enclosure is suitable for controlled indoor environments, not for heavy dust or conductive contamination.

Standards compliance and control interface

The drive carries CE marking and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1 — covering electrical safety, EMC, and enclosure protection for industrial drive installations. Control wiring includes 4 software-configurable analogue inputs (0...20 mA / 4...20 mA, 250 Ohm impedance), 1 analogue output of the same type, and 6 discrete inputs (expandable to 10). The control supply is 220 V AC, 3 kVA, with an optional 220 V AC/DC external supply.

MPN
ATV1200A106001010