Skip to main content
Schneider Electric GC1622B5

Schneider Electric GC1622B5 TeSys GC Modular Contactor, 4P,

MPN GC1622B5
Obsolete

Schneider Electric TeSys GC series, GC1622B5 modular contactor, 4 poles, 24 V AC 50 Hz control, rated breaking capacity 40 A at 400 V, clip-on DIN rail mount, set of 6.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GC1622B5 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 50 Hz
Main product or component typeModular contactor
Voltage<= 250 V AC
Coil voltage24 V AC 50 Hz
Insulation voltage ui500 V conforming to IEC 61095 500 V conforming to VDE 0110
Current16 A AC-7 A 5 A AC-7B
Utilization categoryAC-7B AC-7 A
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max50 °C
Temp operating min-5 °C

All specifications

GC1622B5 additional specifications
ParameterValue
Storage temperature-40...70 °C
ColorWhite
Depth62.5 mm
Width36 mm
Height85 mm
Electrical life cyclesAC-7 A: 100000 cycles AC-7B: 100000 cycles
Mechanical life cycles1000000 cycles
ApplicationMotor control Lighting Heating
Operating time10...25 ms opening 10...30 ms closing
Operating position30°/vertical
Operating temperature-5...50 °C

Product details

The utilisation categories are AC-7A and AC-7B, meaning it is suited for switching motor loads, lighting, and heating circuits.

The AC-7A and AC-7B categories cover motor starting and switching of resistive/inductive loads respectively; the electrical durability is 100,000 cycles for both, which is typical for a modular contactor in a panel. The control coil draws 34 VA inrush at 50 Hz and dissipates 1.6 W holding, so factor that into your control transformer sizing. The drop-out voltage range is 0.2 to 0.75 Uc, meaning the coil releases reliably at low voltage — important for undervoltage protection schemes.

Screw clamp terminals on both control and power circuits; torque to 0.8 N.m. Power circuit accepts up to 6 mm² flexible or solid wire. The contactor is IP20 finger-safe out of the enclosure, IP40 when installed in a suitable cabinet. Operating position can be up to 30° from vertical. The protective treatment is TC (tropicalised coating), so it handles humidity better than a standard untreated contactor.

MPN
GC1622B5