Skip to main content
Schneider Electric LX0FH008

Schneider Electric LX0FH008 TeSys F Contactor Coil, 220-230

MPN LX0FH008
Active

Schneider Electric TeSys F contactor coil, LX0FH008, 220...230 V AC/DC control circuit, 50...400 Hz AC or DC standard.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX0FH008 specifications
ParameterValue
Control circuit typeAC 50...400 Hz DC standard
Main product or component typeContactor coil
Coil voltage220...230 V AC 50...400 Hz 220...230 V DC
Mechanical life cycles1 Mcycles
Operating time50...100 ms unlatching 45...50 ms latching

Product details

The LX0FH008 is a replacement contactor coil for the TeSys F range from Schneider Electric. It is the coil assembly that, when energized, pulls in the contactor's main power poles and auxiliary contacts. The control circuit accepts 220...230 V AC across 50...400 Hz, or the same voltage range on DC, making it flexible for panels with mixed control supplies. Coil resistance measures 25.77 Ohm for the latching winding and 4090 Ohm for the unlatching winding at 68 °F (20 °C). Operating time is 50...100 ms unlatching and 45...50 ms latching.

If your customer's AVL requires a current-production part, a deviation request will be needed.

The 220...230 V AC/DC control voltage covers standard 230 V line-to-neutral control circuits common in European and Asian panels. The AC 50...400 Hz range means it works on 50 Hz mains and also on 60 Hz or higher-frequency supplies used in some aerospace or marine gear. The DC standard acceptance means a 220 V DC battery bank or rectified supply will also pull the coil in — useful for UPS-backed control buses. The latching voltage limits of 0.85...1.1 Uc mean the coil must see at least 187 V and no more than 253 V to reliably latch. Outside that band, the contactor may chatter or fail to close. The unlatching limits are the same range, so the drop-out voltage is not a separate spec — the coil releases when voltage falls below the lower threshold or is interrupted.

MPN
LX0FH008